Top 10 Hair Dying Mistakes

Whether you want to want to get rid of that gray hair or you just want to have a new look, dying is a good way to achieve it. Unfortunately, hair dying entails consequences that may damage and dry your hair when used inappropriately. The selected color of your dye should blend with the original color of your hair and eyebrows and to enhance your features. Experimenting is good, but dyes can be rough on your hair when used frequently. Although it is best to dye at a professional salon or stylist, it is much cheaper at home with the same creative effect. Before you see the top 10 hair dying mistakes, it is important to have an understanding of the different types of hair dye that are available so you can put them in context.

Bits Tools

Types of Hair Dye

Bits Tools

1. Permanent hair dye

While dying your hair permanantly is, by some, considered in and of itself a mistake, the obvious benefit is that it lasts for a considerable time. As the hair grows, it is applied to the roots. It contains ammonia and peroxides, which can possibly cause dryness and damage. Exposure to the sun and salt water will cause the color to fade. That's why in order to maintain the color, it is best to cover your hair by using a hat or bandanna when going outside.

2. Long-lasting Semi-permanent

As the name implies, has the longest life remaining even after more than 20 washes, depending on the brand.

3. Semi-permanent

These have the shortest lifespan for dyes. After 6-12 washes, the color will start to fade. This is recommended for first-time users and those who want to experiment with colors.

How to dye your hair safely and professionally:

- Separate hair into two quadrants. Then clip each part.

- Wear plastic gloves while mixing dye solution. Follow the directions written on the box.

- Squeeze a small amount of coloring into one quadrant. Streak thin stripes of color over the whole area of the quadrant. Put a clip on the colored part.

- Repeat the process after you have completed coloring the four quadrants.

- Consult instructions on how long you should leave it. Add a couple of minutes of wait to that of the suggested treatment time.

- Put on left over color mix to the entire head after a few minutes.

- Rinse with cold water.

Top 10 hair dying mistakes!

- Number 10: Applying dye to dirty, tangled hair

Deep condition your hair a month before dying to maintain color. Be sure your hair is relatively clean before applying. Trim hair especially dry and split ends to even out color. Hair should be slightly damp when dye is applied.

- Number 9: Using hair conditioner before you dye

Do not condition your hair a few hours before applying hair dye, shampooing will do the trick. Your hair needs to be free of free radicals such as dirt and oil as much as possible.

- Number 8: Choosing hair dye based on what the model on the box looks like

Consult the local salon or stylist on what colors would look best on you. The hair dye you choose should have the same tone as your skin color.

- Number 7: Forgetting to check for allergic contents

After choosing a brand, apply a tiny amount of hair dye near your neck or behind your ear to see if irritation, redness, inflammation, allergy, hair loss or any bad reactions occur. Wash the affected area right away if this happens. Remember the instructions carefully. Do the patch test 1-2 days before hair dye application.

- Number 6: Doing your entire head without testing a small amount of your hair first

Do a strand test by applying a bit of dye to a few stands of your hair to see if you got the right color.

- Number 5: Staining your skin or clothes

Protect your skin by wrapping a towel around your neck as the dye can irritate your skin or affect your clothes. Gloves should be used and must be included in a hair dye kit. Applying petroleum jelly or cream around your ears and neck part will keep off stains. Wipe off oil after shampooing. If you do happen to stain your skin, don't worry, rubbing alcohol will remove dye stains from your skin

- Number 4: Picking a color that does not fit with your natural hair color

Pick a color one shade lighter when dying your roots. This will make the transition from your colored hair back to your natural hair color graceful without roots that are a completely different color sticking out. Obviously, this rule does not apply if you are dying your hair a completely different color than your natural hair color.

- Number 3: Losing hair

After dying, always rinse with cold or tepid water to avoid your own hair from falling out.

- Number 2: Over-dying hair

If you did not achieve the desired effect, using Liquid Tide can correct this. A couple of days of use will lighten the color until your hair returns to the original color. Instead of over-dying, do touch-ups every four to five weeks to keep your hair color picture perfect.

- Number 1: Dying eyebrows and eyelashes

Never use hair dye on eyebrows and eyelashes! Ask for medical help when dye gets into your eye.

Top 10 Hair Dying Mistakes

Bits Tools

Tv 50 Lcd 47 Inch Lcd Hdtv

Top 10 Meeting Ice Breakers

Getting people comfortable in a group setting before a team meeting can be the best investment of ten to 15 minutes of time that you can make. Ice breakers get creative juices flowing, can increase the exchange of ideas, establish team identity, and create a sense of community. All of these items are important in forging top productive teams. But how do you get people to participate and not feel uncomfortable with an ice breaker?

Bits Tools

For meetings in a business setting in which participants are professionals, ice breakers that require actions not normally associated with day-to-day behaviors in the office generally make people uncomfortable. Successful ice breakers for these type of groups generally consist of having attendees share memorable information with each other, create innovative ways to get people to introduce themselves to each other, or have group members collectively work on a problem where everyone has to contribute.

Bits Tools

We've selected our top ten team meeting ice breakers that are sure to get your meeting participants relaxed and ready to focus on your agenda as well as to connect with others in the group.

1. Brainstorm!:Break the meeting into teams of four or five. Give each team a topic. Pick topics that are fun and simple like, "What would you take on a trip to the desert?" or "List things that are purple". Give your teams two minutes, no more, and tell them "This is a contest and the team with the most items on their list wins." Encourage the teams to write down as many things as they can and not to discuss anything, just list things as quickly as possible. At the end of two minutes, the team with the most items on their list wins! This helps people to share ideas without fearing what other people will think.

2. Same or Different:

Divide the meeting into teams of three or four and give each team a large sheet of paper and then give each person a different colored marker. Have each person draw a large oval such that each oval overlaps with the other ovals in the center of the piece of paper. Give the group or groups, a theme that pertains to your meeting objectives. Ask the participants to write down at least five or more entries in the non-overlapping and mutually overlapping areas of their ovals. Give them five minutes, no more than that, to talk about their similarities and differences and write them in their own ovals on the paper. If there is more than one group, compare results and identify common themes in both parts of the diagrams and what light these similarities and differences shed on the purpose of the meeting. This helps team members develop an understanding of shared objectives and in a non-confrontational way learn how their views differ from others in the group.

3. Fact or Fiction:

Have everyone write down three surprising things about themselves, two of which are true, and one of which is made up. Each person, in turn, reads their list and then the rest of the group votes on which "fact" they feel is the "false" one. If the group does not correctly pick a person's made up "fact", then that person wins. A group can have more than one winner. At the end, the whole group votes on which of the "winners" of the final round, had the most deceiving "fact". This helps people get to know and remember their colleagues.

4. Free Association:

The object of this ice breaker is to have small groups generate as many words or phrases as they can that are related to a particular topic that focuses on the objective of your meeting. Give the group or groups a key word you want them to associate with and then give them two minutes to list, as quickly as possible, as many words or thoughts that pop into their heads. For example, if your company is trying to decide on whether to reduce travel and increase the use of teleconferencing, you might use the word "teleconferencing" and have people list as many words or phrases they can that they associate with the key word. For example they might say: "saves money", "saves time", "impersonal", "need to see other people", "get distracted", "sound quality".... This reveals what people are thinking, similarities in viewpoints, and possibly even problem areas or topics that need addressing or further discussion.

5. Nametags:

Prepare nametags for each person and put them in a box. As people walk into the room, each person picks a nametag (not their own). When everyone is present, participants are told to find the person whose nametag they drew and introduce and say a few interesting things about themselves. When everyone has their own nametag, each person in the group will introduce the person whose nametag they were initially given and mention something of interest about that person. This helps participants get to know and remember each other.

6. Desert Island:

Group people in teams of five or six and tell them they will be marooned on a desert island. Give them 30 seconds to list all the things they think they should take and each person has to contribute at least three items. At the end of 30 seconds, tell the teams they can only take three things. Have the person who suggested each item on the list tell why they suggested it and defend why their item should be one of the chosen three. This helps the team learn about how each of them thinks, get to know each other's values, and how they solve problems.

7. Commonality Plus:

Group your meeting participants at tables. At each table ask the group to list ten ways that everyone in that group is similar. Let them know that they cannot list body parts or clothing and that what they select cannot have anything to do with work. One person at the table should be tasked to make their list. At the end of your time limit have the group share their list with all meeting members. This is a great opportunity for your meeting attendees to learn about each other's hobbies, families, and common interests.

8. Line Up:

As people enter your meeting hand each one a piece of paper with a different number written on it. Ask the group to arrange themselves in numeric order without using their voices, hands, or showing their number. This helps the team to think of other ways to communicate with each other and to work together to achieve a common goal.

9. Meet and Greet Shoe Pile:

This works great in large groups and is a variation of the name tag ice breaker. Have everyone take off one of their shoes and throw it into a pile. Have each group member pick up a shoe and walk around the meeting room greeting other people as they try to match their selected shoe to the one another team member is wearing. This is a great way for new people to meet several members in a group.

10. First or Worst:

Have each member tell the group their first or worst job in turn. This easy to use ice breaker works great with teleconferences too and allows team members to spark conversation with each other and to have some fun commenting on the jobs that they have each done. Many of our top ten ice breakers can be used for on-site meetings and teleconferences alike. The nature of ice breakers is to get the group to talk, to share, and to get to know each other in a casual exchange. The best and most successful teams start with a little bit of fun; learning how to value what each member brings into the group. Ice breakers can help facilitate this exchange of information and comfort in doing so at the very start of the team forging process.

Top 10 Meeting Ice Breakers

Bits Tools

Christmas Sales SE 3 Pc. Power Extension Socket Bits for Drills 201

Dec 20, 2011 17:42:57

Click for larger image and other views

>> Click here to update Christmas prices for SE 3 Pc. Power Extension Socket Bits for Drills <<

Christmas Sales SE 3 Pc. Power Extension Socket Bits for Drills Feature

• Power Extension Bar Sizes: 1/4" Hex X 1/4"Dr. 1/4" Hex X 3/8"Dr. 1/4" Hex X 1/2"Dr.
• Chrome - Vanadium Steel
• Heat - Treated
• Made In China

Christmas Sales SE 3 Pc. Power Extension Socket Bits for Drills Overview

Add versatility to your power drills. 3pc Power Extension Socket Adaptor has Hex bit for all power drill chucks. Comes in 3 Sizes : 1/4 in. , 3/8 in. & 1/2 in.for your full range of sockets.

SAVE NOW on Christmas Sales Offers below!

Available In Stock.

This Christmas SE 3 Pc. Power Extension Socket Bits for Drills ships for FREE with Super Saver Shipping.

Price : Click to Check Update Prices Please.

Limited Offer Today!! SE 3 Pc. Power Extension Socket Bits for Drills Christmas and Cyber Monday 2011 Deals

Angled Finish Nailer 40 Inch 1080P Hdtv

10 Tips on How to Seduce Your Husband Successfully

Let's face it, learning how to seduce your husband seems to be a strange thing to do right? Well not really. The problem is that unless you stand there completely naked shouting "take me to bed you big stud" he simply won't get the message. This isn't necessarily the guy's fault some of them have an emotional block which doesn't allow the gentler side of romance in. It's a bit like chopping your finger off while the Super Bowl is on, he just won't notice.

Bits Tools

Here are some tips on how to seduce your husband which will work on the most unromantic ones out there.

Bits Tools

1. Champagne under the stars, this is a great one to start with. Once you've had dinner just slip outside and put a couple of glasses on a rug in the garden, invite him outside and just watch his face. This one is best done in summer. 2. Make dinner together. Now all women know how sensual some food can be, especially if you are preparing it in a slow seductive manner. I tried this a couple of times and never even got to eat the meal so you may want to tone this one down. 3. Book a hotel room for the weekend. When he gets home on a Friday night make sure that there is nothing which needs doing over the weekend and get in the car and go to the hotel. Have yourself a nice quiet meal and make sure that room service has a nice bottle of something on ice for when you get back. Make sure that you order strawberries, and for a change, you feed them to him nice and slow. 4. Go to the movies. Now I'm not saying that you should get down and dirty at the multiplex but what I am saying is that you can still stroke his hands and thighs in the darkness. Every now and again just lean over and whisper something sexy in his ear. The trick to this is to make sure that you stay for the whole movie. 5. Play some music softly. Now we all know that men love music, so put on a bit of a show for him. You can quite easily seduce your man with a little dance to some soft music. The reason you have the music on low is because he will sit quietly so that he can hear it whilst he's watching you, this doesn't have to be a striptease you could do this while you are ironing a shirt, reading a newspaper, this will cause high visual stimulation. 6. Send him sexy texts. This is a great one, I've actually had a lot of fun with this one while I was learning how to seduce my husband, he even drove home on lunch breaks because of some of the comments I sent him. 7. Biting. Now this one may seem a little OTT but playful biting can be an enormous turn on for him, just wait until he's got out of the shower or having a shave, walk up and put your arms around him from behind and give him a little bite on the top of his back. Just remember with this one, not too hard. 8. Clothes. Get a skirt which is shorter than your usual ones and wear a g-string, sit opposite him while he is watching TV and slowly open and close your legs. Enough said about this one. 9. Send a photo. If you're the brave type you could always send him a naked picture of you to his mobile phone with a caption which says something like "I love you this much". Two points with this one - make sure you put his name in the message (in case he thinks you're having an affair) and always make sure you send it to the right number. 10. Give him a massage. There is nothing a guy likes more than a massage, but make sure that you are in complete control. Don't let him touch you until you've finished what you're doing, by which time his blood will be pumping so hard that you will feel it through every part of his body.

These are just some of the tips for learning How To Seduce Your Husband, there are others. Just remember throughout any of the seduction techniques, you are the one in control, if he gets to heavy too fast then it's up to you to slow him down and get him back to your speed.

10 Tips on How to Seduce Your Husband Successfully

Bits Tools

Wireless Home Surround Sound Kolcraft Stroller Parts Hd Media Players

Horoscope 2012

The 2012 astrology year begins with a lingering influence from 2011. Jupiter, the wealth planet, was moving backwards causing cash shortages and economic crisis but by January 1st 2012 things improve as the planet starts moving forward again. This brings news about improvements in the economy and most individuals will also experience enormous improvements in their personal financial affairs as well.

Bits Tools

This kind and prosperous influence continues throughout the year but many people will be doing a lot better than they ever expected when Jupiter in Gemini starts a trend towards economic recovery. If you are an air sign in the performing arts or in the media you will especially do well in the last half of 2012 because of this prosperous influence. On June 6th a powerful woman or female influence somehow figures into the rebalancing of the world economy and a general feeling that things are going to improve in every aspect.

Bits Tools

However the world-wide economic crisis will still be affecting most people as Saturn in Libra creates red tape and slow-downs in government. Big institutions such as hospitals and schools also become less efficient when Saturn enters Libra. After Saturn enters the lean and mean sign of Scorpio on October 14th many of us will be hearing news about cut-backs, increased taxes or new laws that make life a little more expensive in general. The worst months economically for most Zodiac signs are going to be February, June and July when Jupiter does not align well with Saturn. We will hear a great deal of news about overspending and misappapropriated funds sat this time. Debt may still be overwhelming some signs, especially the earth signs of Virgo, Taurus and Capricorn.

Uranus is in Aries all of 2012 bringing us rapid evolution when it come to technology. However it will also bring the religious freaks and cult leaders out of the woodwork to preach about the apocalypse. Terrorism, mass delusion and explosions (both environmental and those caused by war) will be in the news this volatile year.

Neptune in Pisces causes people to trust their intuition more than they trust facts and figures. It is best not to rely on wishful thinking and hope that big problems with resolve on their own.

People tend to be a bit more hot-headed about romance when Neptune is in Pisces so there will be more than news than usual about crimes of passion in the newspapers.

On December 21st there is an unusual planetary alignment between Pluto, Saturn and Jupiter. A crisis, either environmental or war-like, is likely to alarm most of the world, perhaps even having us believe that the worse case scenario can happen. However, democratic and placating vibes from love planet Venus prevents the disaster or conflict from being worse. Pluto is a planet of deep transformation, and along with the influence from Venus, the world will be able to find solutions for the worst of it's problems rather than go through a full-fledged apocalypse as predicted by so many.

Horoscope 2012

Bits Tools

Christmas Sales Black & Decker 15557 10-Piece Drill Bit Set 201

Dec 18, 2011 16:56:54

Click for larger image and other views

>> Click here to update Christmas prices for Black & Decker 15557 10-Piece Drill Bit Set <<

Christmas Sales Black & Decker 15557 10-Piece Drill Bit Set Feature

• This 10-piece Drill Bit Set contains the most popular range of drill bits - sizes 1/16-in to 1/4-in
• Comes with a handy bit bar that makes storing this set in any toolbox, pocket or kitchen drawer easy

Christmas Sales Black & Decker 15557 10-Piece Drill Bit Set Overview

Includes (1) 1/16-in HSS Drill Bit, (1) 5/64-in HSS Drill Bit, (1) 3/32-in HSS Drill Bit, (1) 7/64-in HSS Drill Bit, (1) 1/8-in HSS Drill Bit, (1) 9/64-in HSS Drill Bit, (1) 5/32-in HSS Drill Bit, (1) 11/64-in HSS Drill Bit, (1) 3/16-in HSS Drill Bit, (1) 1/4-in HSS Drill Bit

SAVE NOW on Christmas Sales Offers below!

Available In Stock.

This Christmas Black & Decker 15557 10-Piece Drill Bit Set ships for FREE with Super Saver Shipping.

Price : Click to Check Update Prices Please.

Limited Offer Today!! Black & Decker 15557 10-Piece Drill Bit Set Christmas and Cyber Monday 2011 Deals

Wireless Bluray Players Complete Home Theater System

TEKTON 2928 14-Piece Power Nut Driver Bit Set

Christmas Sales TEKTON 2928 14-Piece Power Nut Driver Bit Set 201

Dec 17, 2011 19:40:15

Click for larger image and other views

>> Click here to update Christmas prices for TEKTON 2928 14-Piece Power Nut Driver Bit Set <<

Christmas Sales TEKTON 2928 14-Piece Power Nut Driver Bit Set Feature

• Forged and hardened chrome vanadium steel
• Corrosion-resistant sandblasted finish
• Universal 1/4-inch hex shanks
• Complete with work belt storage clip
• Quality guarantee

Christmas Sales TEKTON 2928 14-Piece Power Nut Driver Bit Set Overview

This 14-piece power nut driver bit set features sandblasted, chrome vanadium steel, precision-milled, 1/4"-hex shanks made to fit all power drills, screwguns, and cordless and magnetic screwdrivers. It contains seven power nut driver bits (SAE): 3/16-inch, 1/4-inch, 9/32-inch, 5/16-inch, 11/32-inch, 3/8-inch, and 7/16-inch, and seven other power nut driver bits (metric): 5 mm, 5.5 mm, 6 mm, 7 mm, 8 mm, 10 mm, and 12 mm. It also comes with a plastic storage clip designed to fit on workbelts.

SAVE NOW on Christmas Sales Offers below!

Available In Stock.

This Christmas TEKTON 2928 14-Piece Power Nut Driver Bit Set ships for FREE with Super Saver Shipping.

Price : Click to Check Update Prices Please.

Limited Offer Today!! TEKTON 2928 14-Piece Power Nut Driver Bit Set Christmas and Cyber Monday 2011 Deals

Double Stroller With Car Seat

How To Write A Thank You Letter After An Interview - A Simple Formula for Uniqueness

Sending a thank you letter is as important as interview preparation. But they're tough to write, so people either tell themselves that not sending one doesn't matter, or they procrastinate until it's too late and almost pointless anyway. But anyone who tells themselves that foregoing a fundamental rule of etiquette doesn't matter, not only taints themselves in the mind of the interviewer, but misses two additional opportunities to sell.

Bits Tools

A thank you letter is an additional sales piece. As I've said before, you're selling a product and the product is you. So beyond the reason of etiquette, the letter sells you as a polite person who recognizes that the interviewer gave them something valuable: time and consideration.

Bits Tools

A fundamental rule of sales is to keep the product in front of the buyer and reinforce its benefits. So beyond the etiquette, the letter gives you ample space to comment on what you liked about the company, why your skills are of benefit to them, and how much you're interested. If something wasn't tied up, or was left unsatisfactorily, you should use the space to further address the issue.

When you miss the opportunity to reinforce your skills and tie them to the job requirements, you miss a chance to sell. When you fail to address a concern or answer a question and leave it to fester in the mind of the interviewer, you've failed to overcome an objection. And if a buyer has an objection to the product, if it isn't addressed, the likelihood of the sale is slim.

The third opportunity missed by skipping the thank you letter is the chance to keep your name in front of the buyer. Read newspapers? Watch TV? See the same ads over and over and over again? It's somewhat the same principle - if you keep your name in front of the hiring authority, they're more likely to remember you.

Thank you letters are one of the reasons it's important to take notes during an interview. Not only does it show good attention to detail, it saves you from having to scrunch your face up trying to remember some of the information you learned about the company and position during the interview. Because if you met with three separate people during one visit to the company, that's three thank you letters....three different thank you letters.

So let's look at how to create one of these so that it becomes a less odious task.
First paragraph Open with the obligatory thank you and include how you enjoyed the meeting. Say why. Maybe the people you met were exceptional. Perhaps their company philosophy was exactly what you had hoped for. Or they need to overhaul a department and you can't wait to sink your teeth into it because that's what you've got a stellar track record of doing. It doesn't matter. Pick something out, and put it down. But make it real. Second paragraph What took place during your interview? Pull out a piece of information that pleased you, say what it was, and tell them why. For instance: I was particularly pleased to find that X company/the opportunity/your management style has/was/is/does whatever. This is exciting because...... . You can expand on whatever it is for a few sentences by elaborating: how it relates to something you've experienced and liked -- or didn't like. Discuss a particular aspect of the job you find appealing and reiterate why you'd be successful at it or how long you've been performing it or how similar it is to something you've done in the past. Third paragraph You can add a similar paragraph if the second was fairly short. Or you can wind it up if it was a bit lengthy. If there was something that came up that needed clarification or about which they were dubious, address it and clear it up here. Fourth paragraph Wind it up. Re-iterate your interest. Be enthusiastic! Leave the job speak behind. If you really want to be hired, let your interest shine through. There's nothing wrong with coming right out and saying, "I'd love to work with X company!"
Caution: Don't start every sentence with "I". It may be the easiest way to write the letter but it's not only repetitive, it's a turn off and egotistical. This process is about you getting a job, but it's about what they get out of it if they hire you.

If you really want the job, the letter will be easy to write because it will contain genuine impressions and sentiments. If you choose to skip the letter, perhaps you don't care if you're hired or not. But make that decision yours and withdraw from the process instead of letting the decision be made for you.

How To Write A Thank You Letter After An Interview - A Simple Formula for Uniqueness

Bits Tools

Panasonic Projector Bulbs Vitamin Nutrition Monitor 19 Lcd

The Forstner Drill Bit

The Forstner drill bit is a popular bit used by woodworkers when making furniture, creating inlays in veneer, and whenever an edge hole, overlapping holes, cross-grain hole, or boring at an angle (called a pocket hole) is required. These bits are also useful for quickly removing large amounts of material, referred to as "hogging."

Bits Tools

The Forstner drill bit was invented by Benjamin Forstner (1834-1897.) He was a gunsmith and was frustrated by the use of available drill bits when a smooth-sided hole with a flat bottom was required. His original design involved a round cylindrical cutting edge without any gaps. It was patented on September 24, 1874. Modern Forstner bits have split ring cutting edges in order to improve the removal of material during the drilling process. Typically, when using these bits, they need to be removed from the hole from time to time in order to remove the cut material from the hole.

Bits Tools

The key to understanding the usefulness and benefits of the Forstner drill bit lies in its shape. The bit consists of a center point, which centers the hole and guides the bit through the hole. The cylindrical cutters around the perimeter shear the wood fibers at the edge of the bore and help guide the bit into the material more precisely. The radial cut off edges on the bit plane of the material at the bottom of the hole. The results are a flat bottom hole precisely cut through the wood to the proper depth. The bit is not affected by the grain of the wood or by imperfections in the stock. Sawtooth Forstner bits are available. They cut faster but produce a more ragged hole. Since Forstner bits require greater force than other types of drill bits to move through the material being bored, they are typically used in drill presses.

An example of the value of using a Forstner bit comes when there is a need to join several lengths of wood in order to create a cabinet door. One method is to use dowels set into the edges of the planks. The Forstner bit is the bit of choice because it easily moves through the edge of the boards and leaves a flat-bottomed hole for the dowel to sit in.

Another example of the usefulness of Forstner bits is the installation of barrel hinges in cabinet doors. These hinges are installed in the edges of the door and cabinet frame and are completely invisible when the door is closed. Once again, the Forstner bit can best produce the precision hole necessary to complete this process successfully as its direction is not affected by the end grain of the wood.

Forstner bits are usually more expensive than other types of drill bits and can be found in most hardware stores, large home improvement stores, and online. Their usefulness in a variety of applications makes their higher cost acceptable. They come in a variety of sizes ranging from 1/4" to 4". They are usually found in sets and can be found with carbide tips. Carbide tipped drill bits are preferred as they keep their sharpness longer, cut into material more easily and generate less heat when in use.

The Forstner Drill Bit

Bits Tools

Christmas Sales Makita T-01389 62-Piece Impact Drill-Driver Bit Set 201

Dec 16, 2011 00:52:24

Click for larger image and other views

>> Click here to update Christmas prices for Makita T-01389 62-Piece Impact Drill-Driver Bit Set <<

Christmas Sales Makita T-01389 62-Piece Impact Drill-Driver Bit Set Feature

• 135-degree split-point tip
• 1/4-inch shank size
• 62-piece set
• Includes clam shell carrying case
• Compatible with all drills

Christmas Sales Makita T-01389 62-Piece Impact Drill-Driver Bit Set Overview

Includes seven black oxide precision 135-degree split point 1/4-inch hex shank drill bits, (2) 1/16-inch, 3/32-inch, (2) 1/8-inch, 3/16-inch, 1/4-inch, (3) wood boring drill bits 1/2-inch, 5/8-inch, 3/4-inch, (9) 2-inch driver bit assortments: slotted, Phillips, Robertson & Torx, (32) 1-inch driver bit assortment: slotted, Phillips, Robertson & Torx, (2) hex-to-square socket adapter: 1/4-inch - 1/4-inch, 3/8-inch, (1) max-mag nut drivers: 1/4-inch, 5/16-inch, 3/8-inch

Christmas Sales Makita T-01389 62-Piece Impact Drill-Driver Bit Set Specifications

The Makita T-01389 62-piece drill and driver set is a great value -- more accessories, more savings. Every tool is black-oxide coated to resist corrosion, and given a proprietary heat treatment for sharper, longer lasting life. Manufactured with Ultra-Lok 1/4-inch hex shanks, the tools are compatible with all quick-change connector systems, electric or battery-powered drill/drivers, and impact drivers. The drill bits are manufactured using high-speed steel with precision 135-degree split-point tips to prevent drill bit walking. The pro-grade, maximum magnetic 3-inch bit holder and nut drivers provide extra-strong fastener retention.

View larger

T-01389 Features PERFORMANCE - Pro-Grade Impact Drill-Driver Compatible DURABILITY - Black Oxide finish resists corrosion and extends drill bit life VARIETY - 62 pieces of the most commonly used bits provides outstanding versatility for your drilling and driving jobs CONVENIENCE - Durable, compact storage case INCLUDES - Injection molded case with 62 pieces

Tool Specifications Overall length 7-3/4" Net weight 2.1 lbs.

About Makita's Power Tool Accessories
Get the right accessory for your toughest applications. Makita has a full line of accessories including framing blades with advanced "M-Tooth" design, ultra-coated miter saw blades, steel demolition bits, Optimum diamond blades, Thruster Percussion bits, Blue Steel CERMET-tipped blades, and many, many more. Expand your LXT cordless lineup with 18-volt lithium-ion batteries, Energy Star-rated battery chargers, flashlights, and jobsite radios.

About Makita
Makita is a worldwide manufacturer of industrial quality power tools and offers a wide range of industrial accessories. Makita applies leading-edge innovation to engineer power tools that are more compact and energy efficient, yet deliver industrial strength power and results. Makita U.S.A., Inc. is located in La Mirada, California, and operates an extensive distribution network located throughout the U.S.Makita is Best in Class Engineering.

Whats in the Box Makita T-01389 62-Piece Impact Drill-Driver Bit Set includes: Injection molded case (33) 1-inch Driver bit assortment:
	Phillips bits: 4 Phillips #1    9 Phillips #2    4 Phillips #3	Robertson/Square drive bits:    2 Robertson #1    3 Robertson #2    3 Robertson #3	Torx bits: 2 Torx T15       3 Torx T20	Slotted bits: 1 Slotted 6-8    2 Slotted 8-10
(9) 2-inch Driver bit assortment:
	Phillips bits: 2 Phillips #2    2 Phillips #3	Robertson/Square drive bits:    1 Robertson #2    2 Robertson #3	Torx bits: 1 Torx T20    1 Torx T25
(7) UltraLok black oxide drill bits precision/135° split point 1/4-inch hex shank:       2 1/16-inch, 3/32-inch, 2 1/8-inch, 3/16-inch, 1/4-inch (4) Wood boring spade drill bits with spurs:       3/8-inch, 1/2-inch, 5/8-inch, 3/4-inch (3) 3.5-inch Extended length driver bits:       Phillips bits: 2 Phillips #2       Robertson/Square drive bits: 1 Robertson #2 (3) Magnetic nut drivers:       1/4-inch, 5/16-inch, 3/8-inch (2) Hex-to-Square socket adapter:       1/4-inch, 3/8-inch (1) Magnetic bit holder

SAVE NOW on Christmas Sales Offers below!

Available In Stock.

This Christmas Makita T-01389 62-Piece Impact Drill-Driver Bit Set ships for FREE with Super Saver Shipping.

Price : Click to Check Update Prices Please.

Limited Offer Today!! Makita T-01389 62-Piece Impact Drill-Driver Bit Set Christmas and Cyber Monday 2011 Deals

High Resolution Projector